Underground Products

4G & 4F Profile Pipe Gaskets

The Type 4G & 4F profile gaskets were developed to specifically meet the needs of contemporary concrete pipe joint designs.

4G Nitrile Pipe Gaskets

Nitrile 4G Gaskets are high-performance gaskets for concrete pipe which combine watertight sealing performance with the ability to resist common underground contaminants.

Avanti AV-202 Hydrophilic Grout

AV-202 Multigrout is a single component, moisture activated MDI/TDI blended polyurethane injection resin. Designed for sealing active water leaks in large cracks or joints in concrete structures, it can absorb up to 12 times its weight in water creating a tough, impermeable foam or gel with superb adhesive qualities. AV-202 Multigrout is certified by UL for NSF/ANSI 61 - Drinking Water System Components.

Cast-A-Dapter

Cast-A-Dapter is a rubber adapter that provides flexible, watertight sealing of single or multiple pipes and conduits into on-site treatment tanks, and pump stations. Used with our Cast-A-Seal® 402 cast-in flexible connector, Cast-A-Dapter is available in a wide variety of pipe diameter combinations to meet the needs of any tank design or specification.

Cast-A-Seal 12-08

For 8" pipe only - The Cast-A-Seal 12-08 is a simple cast-in pipe- to-manhole connector that offers a watertight flexible connector that is cast into the structure when the concrete is poured. The key lock is integrally cast-in during the production process providing a secure seal for storm water and sanitary collection systems.

Cast-A-Seal 402/402F

The Cast-A-Seal 402/402F is a simple cast-in pipe-to-manhole connector that offers a watertight flexible connector that is cast into the structure when the concrete is poured. The key lock is integrally cast-in during the production process providing a secure seal for storm water and sanitary collection systems.

Cast-A-Seal 603

The Cast-A-Seal 603 boot type connector is a simple cast-in pipe- to-manhole structure connector for 8-18” (200- 450mm) PVC pipe that offers a watertight flexible connector that is cast into the structure when the concrete is poured. The key lock is integrally cast-in during the production process providing a secure seal for storm water and sanitary collection systems.

Cast-A-Seal 802

The Cast-A-Seal 802 boot connector is a simple cast-in pipe-to- manhole connector for straight-wall structures only, that offers a watertight flexible connector that is cast into the structure when the concrete is poured. The key lock is integrally cast-in during the production process providing a secure seal for storm water and sanitary collection systems.

Cast-A-Seal 964

The Cast-A-Seal 964 is a simple cast-in pipe- to-manhole connector that offers a watertight flexible connector that is cast into the structure when the concrete is poured. The key lock is integrally cast-in during the production process providing a secure seal for storm water and sanitary collection systems.

Cellular Joint Filler

Our Closed Cell Joint Filler is a flexible, compressible material that easily fills difficult joints in concrete pipes and structures.

Concrete Lubricant (Polylube)

Our standard pipe gasket joint lubricant comes in three different varieties – Ultra, 32 (regular) and Sub-Aqueous.

Corrugated Pipe Adapter

The corrugated pipe adapter gasket is a rubber adapter ring that fits closely into the corrugation of the pipe, creating a smooth exterior diameter for connecting the pipe to a manhole or other types of structures.

  • Used in wastewater or stormwater systems
  • Meets or exceeds ASTM F 2510, ASTM C 1478, ASTM D 2321, Section 7.10 – Manhole Connections

Crete Stik Butyl Joint Sealant

Crete Stik butyl/bitumen blend joint sealant is a rope form joint sealant that will not shrink, crack or dry out.

Econoseal

The Econoseal is a simple cast-in pipe- to-manhole connector that offers an easy installation process in precast production facilities and in the field for contractors. The key-lock is integrally cast-in during the production process providing a secure seal for storm water and sanitary collection systems.

EZ WRAP

EZ-Wrap is an extruded butyl adhesive tape designed to provide high strength, watertight seals on properly primed concrete surfaces and concrete structure joints.

EZ-STIK #4 PRIMER

The EZ-STIK #4 Primer is a solvent based mixture of rubber adhesives, low viscosity gel-type. Its primary use is to promote adhesion of butyl tapes and wraps to concrete surfaces and is designed for dripless paint brush application to concrete surfaces.

EZ-STIK PREMIUM BUTYL SEALANT

The EZ-Stik butyl rubber all-weather joint sealant in rope form seals all forms of underground concrete and containment structures watertight.

EZ-STIK Trowelable Sealant

EZ-Stik #3 is a trowelable butyl sealant suitable for pumping or trowel dispensing onto concrete structures.

EZ-WRAP PAK PRECUT MANHOLE WRAP

EZ-WRAP PAKS are packages of 6" EZ-WRAP Plastic precut for 48", 60", or 72" manhole joints.

Fiberglass Hole Formers

Fiberglass Hole Formers are available for manholes, straight wall structures, and for offset holes in lift stations and wet wells. Sizes from 8′′ to 56′′ diameters in a variety of wall thicknesses. Also available with high-strength magnets for convenient mounting to form cores.

HDPE Waterstop Gaskets

HDPE Waterstop is a rubber ring which is compressed around the pipe circumference using stainless steel clamps, preventing infiltration and exfiltration between the HDPE Waterstop and the pipe. It is then either grouted into an existing structure, or has a new structure poured around it.

Kwik Seal

Kwik Seal is a precisely sized compression connector (pipe to manhole connector) made to fit in a cored or cast opening. The connector is placed into the opening and the pipe is pushed home. This creates a watertight seal when the connector is compressed around the pipe OD and is deformed against the manhole opening. The sealing is similar to how a pipe gasket seals pipe joints.

  • Used in wastewater and stormwater systems
  • Meets or exceeds all requirements of ASTM C 923, including physical properties of materials and performance testing.

Magnets for Hole Formers

Interchangeable high strength magnets together with a fiberglass hole former shell provides the fastest and easiest way to hold hole former's in place; saving time and money. Magnets are easily transferred from one hole former to another, reducing the number needed. Each magnet has more than 300 pounds of force for secure mounting of hole former's.

Manhole Lift System

The Press-Seal Manhole Lift System is an easy and safe method of placing precast concrete manholes, catch basins and other structures in the field. Inexpensive inserts are cast into the structure and reusable ductile iron locking lift eyes make the system economical and reliable. The Lift System has been tested to OSHA requirements and has more than 20 years of demonstrated safe performance. Each lift point is rated to 3600 lbs. A complete design and installation manual is available.

Nitrile Waterstop

Nitrile Waterstop stops soil and water infiltration through pipe-to-structure penetrations when a flexible connector conforming to ASTM C 923 cannot be used. A Nitrile Waterstop is used when there is concern about the connector coming into contact with petroleum based compounds or solvent based compounds.

O-Ring Pipe Gasket

Press-Seal O-Ring concrete pipe gasket for concrete pipe utilizing a confined groove. The straightforward design fits perfectly with the necessary joint for a perfect fit every time.

Pipe Joint Lubricant (CLASSIC)

Pipe joint lubricant for concrete pipe that is applicable as a regular pipe joint lubricant or can be used as an underwater lube.

Pro-Former HDPE Hole Formers

Polyethylene hole former that is nearly indestructible. Made with low draft taper for use with pipe to manhole connectors. Available for round and straight wall structures. Used with our patented magnetic holding device.

PRO-STIK Butyl Sealant

Pro-Stik is an all weather butyl rubber sealant for concrete joints. Butyl sealants are far superior to mastic made from oil or asphalt because they are rubber based.

PSX: Direct Drive

PSX: Direct Drive is a high-performance watertight pipe to manhole connector. It is the premier manhole connector in the industry for providing watertight connections to manholes and other sanitary and storm sewer structures.

  • Used in wastewater and stormwater systems
  • Meets or exceeds ASTM C 923, ASTM C 1244, ASTM C 1478, ASTM F 2510

PSX: Direct Drive 8QRS

The 8QRS PSX: Direct Drive provides a simple method for installing small diameter pipes into manholes or other structures. The unique design of 8QRS allows it to be easily adapted to 1-1/2” to 4” (38 – 100 mm) PVC pipes, either in the plant or in the field.

PSX: Direct Drive Nitrile

PSX: Direct Drive Nitrile is a high-performance flexible pipe-to-manhole connector that offers easy installation and long-term performance in one convenient product.

  • Used in wastewater and stormwater systems
  • Meets or exceeds ASTM C 923, ASTM C 1619 Class D (Material Spec), ASTM C 1244, ASTM C 1478, ASTM F 2510

PSX: Nylo Drive

The PSX: Nylo Drive is a high-performance flexible pipe-to-manhole connector that offers easy installation and long-term performance in one convenient product.

  • Used in wastewater and stormwater systems
  • Meets or exceeds ASTM C 923, ASTM C 1619 Class D (Material Spec), ASTM C 1244, ASTM C 1478, ASTM F 2510

PSX: Nylo Drive 8QRS

The 8QRS PSX: Nylo Drive provides a simple method for installing small diameter pipes into manholes or other structures.

PSX: Positive Seal

The PSX: Positive Seal is a high-performance flexible pipe-to-manhole connector that offers easy installation and long-term performance in one convenient product.

  • Used in stormwater and wastewater applications
  • Meets or exceeds ASTM C 923, ASTM C 1244, ASTM C 1478, ASTM F 2510

PSX: Wedge Drive

PSX: Wedge Drive is a high-performance watertight pipe to manhole connector. It is a weld-free manhole connector utilizing innovative snap pins.

  • Used in wastewater and stormwater systems
  • Meets or exceeds ASTM C 923, ASTM C 1244, ASTM C 1478, ASTM F 2510

Red Gasket Adhesive

Press-Seal Red Gasket Adhesive #1-326 is a custom-formulated contact adhesive that readily bonds rubber to any clean, dry concrete surface.

RFS Nitrile Pre-lubricated Gaskets

Nitrile RFS Pre-lubricated Pipe Gasket is a concrete joint gasket made from synthetic Nitrile Butadiene rubber polymer.

RFS Pipe Gasket

RFS prelubricated pipe gaskets provide simple and reliable sealing of joints in concrete pipe, manholes and other precast concrete products.

Spray Adhesive

Our general purpose Spray Adhesive is a fast drying, super strength adhesive for bonding rubber to concrete and other substrates. The rubber cement is conveniently packaged in aerosol cans making it easy for contractors to use in the field.

T-Handle Torque Wrench

The T-Handle Torque Wrench is a calibrated tool used to properly install our series 304 stainless steel take-up clamps on a variety of connectors such as PSX: Direct Drive, Cast-A-Seal products and WS-30 Waterstop’s.

Waterstop Grouting Rings

WS Series WATERSTOP (WS-25/ WS-30) is a rubber ring which is compressed around the pipe circumference using Stainless Steel Clamps, pre-venting infiltration and exfiltration between the WS Series WATERSTOP and the pipe. It is then either grouted into an existing structure, or has a new structure poured around the pipe with the WS attached to the pipe.