CAST-A-SEAL 964 is the cast-in connector with big advantages. Casting mandrels for 48” manholes eliminate the time and expense of forming or coring holes while ensuring a watertight seal. The unique two-step design accommodates pipe from 4.21” OD to 6.9” OD, in either manhole or straight wall applications.

Press-Seal Gasket offers two types of pipe joint lubricants, Regular and Underwater Lube. Both are specially formulated for the rigors of underground pipe jointing and contain no petroleum that may damage some rubber gasket compounds.

PSX:Direct Drive - Nitrile is a high-performance flexible pipe- to-manhole connector that combines easy installation and proven watertight performance with the ability to resist common underground contaminants, including most hydrocarbons and many mixed chemistries.

Cast-A-Dapter is a rubber adapter that provides flexible, watertight sealing of single or multiple pipes and conduits into on-site treatment tanks. Used with our CAST-A-SEAL® 402 cast-in flexible connector, CAST-A-DAPTER is available in a wide variety of pipe diameter combinations to meet the needs of any tank design or specification.

CAST-A-SEAL® 402 is the #1 seal in the U.S. for watertight performance requirements in septic tanks, pump tanks, grease traps, dosing tanks and other straight wall structures. CAS 402 seals 2"-6" pipe. 

CAST-A-SEAL® 402F septic tank seal uses the same design and mandrel as the CAST-A-SEAL® 402 for septic tanks.  A closed face has been added to this watertight inlet and outlet seal to accomodate multiple inlets and allow for quick vacuum testing without plugs.  CAST-A-SEAL® 402F is for 4 inch pipe only.

Boot-style, cast in connector  for round and straight-wall structures. Available for 8" to 18" pipe. CAST-A-SEAL 603 is easy to use, sure to seal, and reduces production costs in any operation. Cast one CAS 603 as your out-fall hole saving time and money.

Press-Seal Gasket's Cast A Seal 802 is a boot style, (ASTM C923) cast in manhole seal for watertight sanitary and storm manhole or catch basin straight wall structures. This manhole connector seals 15" pipe and larger with ease and less expensive tooling costs than traditional cast in manhole connectors.

Polymer solution which cures when reacted with water. AV-202 reacts freely with water in any proportion to form a strong film, gel, or foam of polyurethane. Intended use would be to prevent water infiltration into sub-grade structures and pipes.

Flex-Lok Plastic Manhole Step Inserts secures polypropylene steps in the wall of a concrete manhole or other concrete structure. They eliminate the need for drilling holes and pounding steps in.

Provides required concrete cover for concrete pipe, manholes, catch basins, tanks or other structures with W5.4 (2 gauge) wire or smaller. Snaps on horizontal or verticle wires. Plastic spacers provide features that steel spacers can't match.

Provides required concrete cover for concrete pipe, manholes, catch basins, tanks or other structures with W5.4 (2 gauge) wire or smaller. Plastic spacers provide features that steel spacers can't match. Comes in 2" and 3" wire spacing with 1" to 1 3/4" concrete cover.

EZ-Stik is an all weather butyl sealant that contains the highest level of butyl rubber of all our butyl sealants. Butyl sealants are far superior to mastic made of oil or asphalt. Since butyl sealant is rubber based, it exhibits physical properties such as rebound, compression, low temperature and high temperature flows that are all required for long term sealing performance. Preformed butyl sealant offers the end user maximum sealing performance and ease of use with no oily mess.

EZ-WRAP is an extruded Butyl adhesive tape, designed to provide high strength, water tight seals on properly primed concrete surfaces and joints of any kind. The butyl compound is soft, tacky and bonded to either a Plastic backing or an E.P.D.M. Rubber backing. Great for tanks, manhole, pipe and box culverts.

Pro-Stik is an all weather butyl sealant. Butyl sealants are far superior to mastic made from oil or asphalt. Since Butyl sealants are rubber based, they exhibit physical properties such as rebound, compression, low temperature and high temperature flows that are required for long term sealing performance. Butyl sealant offers the end user maximum sealing performance and ease of use with no oily mess.